Hardware and software complex of well telemetry "Quantor-5"
The complex provides continuous automatic monitoring of the operation of oil well equipment.
Description
The complex provides continuous automatic monitoring of the operation of oil well equipment.
The following parameters are controlled:
Functions:
linear pressure
fluid level in the well (echogram)
annular pressure of the load on the rod and its movement (dynamogram)
monitoring of parameters
analysis of incoming data
construction of echograms, calculation of the liquid level in the annulus
construction of dynamograms, maximum and minimum load on the rod, stroke
display of telemetry in graphical and digital form on the screen of the receiving and processing unit
saving telemetry in the memory of the receiving and processing unit
sending data to the monitoring server via the GSM network
access to telemetry via the operator's smartphone
Specifications
The number of stored reports in non-volatile memory, at least, pcs. 1 000
Full service life, at least, years 5
Software update Yes, via GSM
Transfer of measurement files E-mail, GSM (LTE, 3G, EDGE, GPRS), USB, Wi-Fi, RS-485
Number of supported sensors Yes, 1 unit for 5 sensors
Ambient conditions from -20 to +60 °С
Unit operation system ANDROID
Full service life, at least, years 5
Software update Yes, via GSM
Transfer of measurement files E-mail, GSM (LTE, 3G, EDGE, GPRS), USB, Wi-Fi, RS-485
Number of supported sensors Yes, 1 unit for 5 sensors
Ambient conditions from -20 to +60 °С
Unit operation system ANDROID
Range of controlled loads, kGf 0…10 00
Swing rate in the interval, swings/min 0…10 000
Discreteness of load control, kGf 10
Discreteness of movement control, mm 5
Continuous operation time, years, at least 3
Service life, years 5
Range of controlled movements, mm 0…10 000
The range of the communication channel, at least 30
Shell protection class, at least, IP54
Continuous operation time after the battery is fully charged under normal climatic conditions, hour, at least 20
Ambient conditions from -40 to +50 °С
Swing rate in the interval, swings/min 0…10 000
Discreteness of load control, kGf 10
Discreteness of movement control, mm 5
Continuous operation time, years, at least 3
Service life, years 5
Range of controlled movements, mm 0…10 000
The range of the communication channel, at least 30
Shell protection class, at least, IP54
Continuous operation time after the battery is fully charged under normal climatic conditions, hour, at least 20
Ambient conditions from -40 to +50 °С
Range of controlled liquid levels 20 - 3900 m
The limiting pressure of the acoustic signal generation mechanism 0…100 kgf/cm²
Resetting a portion of gas when creating a pulse no
Retention of liquid overflow through the pipe yes
Working with vacuum and zero pressure automatic adaptation
Problems when working with vacuum and zero pressure no
Data transfer GSM, Wi-Fi, RS-485
The limiting pressure of the acoustic signal generation mechanism 0…100 kgf/cm²
Resetting a portion of gas when creating a pulse no
Retention of liquid overflow through the pipe yes
Working with vacuum and zero pressure automatic adaptation
Problems when working with vacuum and zero pressure no
Data transfer GSM, Wi-Fi, RS-485
The range of measured pressure, kgf / cm² 0…10/25/60/160/ 250/ 400 /600/ 1000
Data transfer channel GSM
Погрешность измерения давления ±1%
Memory capacity 400 000 measurements
Minimum period between measurements 1 second
Battery life from a set of batteries up to 1 year
Explosion protection level 2ЕхmIIBT3
Shell protection class IP65
Operating temperature range - 40…+50 °С
Installation dimensions, external thread М20*1,5
Data transfer channel GSM
Погрешность измерения давления ±1%
Memory capacity 400 000 measurements
Minimum period between measurements 1 second
Battery life from a set of batteries up to 1 year
Explosion protection level 2ЕхmIIBT3
Shell protection class IP65
Operating temperature range - 40…+50 °С
Installation dimensions, external thread М20*1,5
The receiving and processing unit of the SHC "QUANTOR-5tms"
* - the Customer chooses the configuration
- receiving and processing unit (BPO);
- autonomous dynamograph (ABD);
- stationary echometer (EST);
- wellhead pressure gauge (ARD).
Configuration of the SHC "QUANTOR-5tms"*:
The hardware and software complex "QUANTOR-5tms" is designed for remote monitoring of the condition of downhole equipment (data collection, storage, analysis) with subsequent data transmission via wireless communication channels (GSM, Wi-Fi), RS-485 and USB.
Dynamograph
- The autonomous dynamograph "QUANTOR-5abd" is designed for automatic registration of dynamograms of the operation of oil-producing wells equipped with sucker-rod pumping units for a long time, without the participation of an operator.
- Data transfer from QUANTOR-5abd to the software is carried out via Wi-Fi or cellular communication.
Level and pressure sensor
The stationary echometer "QUANTOR-5est" is designed for telemechanics (telemetry) systems of oil-producing enterprises in order to control the liquid level and gas pressure in the annulus of oil and gas producing and injection wells.
Liquid pressure sensor
The wellhead pressure gauge "QUANTOR-5ard" is designed for automatic registration of liquid or gas pressure in injection or production wells, with subsequent data transmission to software via Wi-Fi or cellular communication.
Software
- Monitoring of connected sensors;
- Display of sensor data in the form of plates;
- Visualization of the dynamogram on the plate;
- Setting up the display of parameters in the plate;
- Setting up sensor polling;
- Overlap of the actual and theoretical dynamogram;
- Database on well equipment;
- Integration with level gauges and pressure sensors.
The receiving and processing unit of the SHC "QUANTOR-5tms" provides the following features:
Связь
Датчик динамометрирования
Датчик уровня и давления
Датчик давления жидкости
Мобильный телефон
Блок приема и обработки
Wi-Fi
Оснащение кустовой площадки
Wi-Fi
Wi-Fi
Wi-Fi
Wi-Fi
GSM
internet
Интеграция с АСУТП
RS-485
Additional features
"QUANTOR-5micro" is equipped with a radio channel for communication of sensors with the registration unit, which ensures the efficiency of research and ease of operation.
The QUANTOR-5micro meter-recorder (MR) is a compact portable device for operational monitoring of the liquid level, annular pressure and the operation of the sucker-rod pump.
Select a package
| Description | Functions | |
|---|---|---|
| |
• The receiving and processing unit of the SHC "QUANTOR-5tms" | Sensor polling, data display and analysis, measurement archive, telemetry mandrel to the monitoring server, WiFi access point. |
| |
Dynamograph | Registration of the load and movement of the rod. |
| |
Level and pressure sensor | Registration of the echogram and annular pressure, determination of the liquid level in the annulum. |
| |
Liquid pressure sensor | Registration of liquid pressure in the line. |
| |
Intertraverse jack | Installing/removing the dynamograph without damaging the polished rod. |
| |
Operational control complex "Quantor-5 micro" | For operational control of well equipment at wells not equipped with a stationary Hardware and software complex "QUANTOR-5". |
| |
Smartphone | A mobile phone in IP68 protected design with the software "QUANTOR-5". Provides access to the telemetry of the Receiving and processing Unit via Wi Fi. |
Send your application
МЕНЮ
ПРОДУКЦИЯ
© 2023 QUANTOR-T